ISO 11424:2023

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٠ يوليو ٢٠٢٣

Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification

ملفات الوثيقة ISO 11424:2023

الإنجليزية 12 صفحات
الإصدار الحالي
31.01 OMR

مجال الوثيقة ISO 11424:2023

This document specifies requirements for rubber hoses and tubing for use in the various air and vacuum systems found on internal combustion engines. This document does not cover hoses used for direct power-brake actuation in trucks and trailers, nor for air intakes and ducting within the passenger compartment. The highest-temperature hoses are generally used for turbocharger applications. All hoses and tubing remain serviceable down to −40 °C.

NOTE       Although the term vacuum is generally used, in reality the application is one of reduced air pressure used for the purposes of actuation or monitoring of the various engine-system components. The air carried by the tubing or hoses can be clean and free of contaminants but can also contain oil, fuel and their vapours as contamination, due to the particular installation and application.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 19490:2025
 
مواصفة قياسية دولية
Dentistry — Sinus membrane elevator
ISO 8168:2025
 
مواصفة قياسية دولية
Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification
ISO 2903-2:2025
 
مواصفة قياسية دولية
ISO metric trapezoidal screw threads — Tolerances — Part 2: Limits of sizes
ISO 10545-23:2025
 
مواصفة قياسية دولية
Ceramic tiles — Part 23: Determination of elastic modulus for glazed and unglazed ceramic tiles, substrate and glaze layer